it’s perfect!

One product to descale and hygienically clean your freshwater tank, the piping and the boiler.
Perfect to clean the waste holding tank of your chemical toilet

Directions for use:

Clean water tank, pipes and boiler: Dissolve 4 scoops in approximately 2 litres of hot water. Pour this solution into the tank use a soft brush to clean the walls. Open the tap to pump the fluid into the pipes and leave it there for 30 minutes. If you have a boiler, add extra water to fill the boiler and leave it there (boiler switched on) for another 30 minutes. Rinse thoroughly with fresh water several times to get rid off the algae and dissolved scale.

Waste holding tank toilet: Dissolve 4 scoops in 3 litres of warm water and add a dash of dish washing liquid. Pour into the waste holding tank. Do not close the cap completely as some inoffensive gas (CO2) can develop. Turn the tank on all sides for some time. The rubber seals can be cleaned with a soapy solution with descaler. Grease with silicon spray or olive oil afterwards.

Tip: If you have a cassette toilet use 4 scoops directly in the holding tank together with half a sachet of toilet additive. Just use the toilet (preferably while driving). After emptying, the tank will be as new!

Rinse water tank toilet: Dissolve 3 scoops and half a sachet toilet additive in the rinse water and use the toilet. Senseo®: Dissolve half a scoop in 800 ml. of water and use the machine until the reservoir is empty with a coffee pad in the machine (to avoid clogging). Repeat this operation and rinse twice with fresh water afterwards.

Safety: Use household gloves if you have a sensitive skin. Avoid contact with the eyes. Do not use on acid sensitive materials like Aluminium and marble. Also read the instructions on the label.

Environment:
The citric acid we use is a 100% biologically (by fermentation) produced product. It is easily, very fast and fully biodegradable.

Tank cleaner / descaler